Adobe
Reader Download Adobe Reader V-7.0 (
Required to view PDF files )
Custom fit Saddle Bag inserts.
Lovingly crafted by my Sister in law. ( Great Gal ! )
Easy lift Engine Jack.
Click Here for plans to
build. { pdf file }
An easy way to lift the front wheel for checking air or for winter storage.
Made from an ordinary turnbuckle acquired from any hardware store.
Ends are made from a piece of scrap aluminum plate and filled with
fiberglass auto body filler. Small size can be kept on bike.
Also doubles as a jack in case of a flat on front wheel.
Broken Tab Repair
Tab built up using J.B.Weld Kwik (same as regular J.B.Weld except it sets up
faster)
Mix equal parts of J.B.Weld. Rough up surface and apply in small
increments.
File to shape.
Anti-Dive Modification
Spacer added, to move the anti-dive plunger up, to prevent it from locking up
the front suspension under normal riding.
Spacer (2d photo) made from 0.064" thick aluminum stock.
Fog Lights Switch Replacement
When the Fog Light Switch goes bad, and it probably will, I don't think
they weather proofed it very well.
This is an inexpensive replacement.
Just cut the old wires off the switch mechanism and add 3 crimp lugs to the
wires.
The switch can be obtained from any auto parts store. I got mine from Advance
Auto Parts. Located in N.H.
( Mfr. “ Conduct-Tite! P/N 84882 )
Wiring..
Bike wire color Brn/Wht goes to Switch Terminal #1 (Power)
Brn/Blu goes to Switch Terminal #2 (Load)
Grn goes to Switch Terminal #3 (Ground)
The switch mentioned is exact size to push into the square opening left by the
OEM switch.
|
